Wolf repair, for ranges, wall ovens and cooktops.
A brand we repair
Beaver Appliance is an independent repair company, not affiliated with Wolf or Sub-Zero Group. We find the fault for one flat diagnostic fee, then put the repair price in writing before any work starts.
Call or text and we’ll give you the earliest time we have.
Still under Wolf’s warranty? Find covered service with Wolf’s service locator.
- Diagnostic fee
- Flat, credited to the repair
- Price
- In writing, before any work
- Our warranty
- Written, on every repair
- Google rating
- 5.0 from 14 reviews
How a repair goes, in customers’ words
Older Whirlpool refrigerator
“… He analyzed the cooling problem on my older model Whirlpool refrigerator. He communicated the issues and answered all my questions. …”
★★★★★ Christine F. Aug 2026, Google review 22-year-old 42″ built-in KitchenAid
“… He patiently answered all my questions, was funny and responsive by text/phone throughout the ordeal, he worked hard and fast, and he did a great job. …”
★★★★★ Jennifer S. Jun 2026, Google review GE Monogram refrigerator
“Brandon fixed my GE Monogram refrigerator freeze. He was very prompt and professional. I would recommend him for your repair.”
★★★★★ Maureen K. Jun 2026, Google review
Built-in kitchen brands we repair
Beaver Appliance is independent of every manufacturer shown here; none of them sponsors or endorses our work.
Wolf’s warranty, year by year
Wolf’s residential warranty counts each term from the day the appliance was installed. Outdoor and non-residential products have their own terms.
In the first two years, a covered repair goes through Wolf’s own service network: Wolf’s service locator.
From year three to five, Wolf still covers the parts on its list, among them heating elements, control boards and induction generators. The owner pays the labor, and gets the part from Wolf when someone outside its network does the work.
After year five the owner pays for the repair. Every term and exclusion is in Wolf’s warranty, which also leaves out defects caused by improper installation, service or repair.
What is your Wolf doing?
Tap one for the causes Wolf’s help pages list and the checks Wolf asks owners to try first.
- The convection fan moves hot air around the food; after preheat, only in a convection mode.
- The heating elements: broil at the top, bake under the floor.
- The cooling fan: it stops the oven overheating and may run up to 45 minutes after it’s off.
- The controls, and a thermal cutout that can trip and stop the heat.
- The door, which locks when a self-clean cycle starts.
A convection wall oven from the side, drawn by us and simplified. Orange: hot air. Dashed: cooling air. The fan and door details are from Wolf’s help pages.
The oven won’t heat, or is slow to preheat
Possible causes: Wolf’s help pages list no power, an unfinished self-clean, a tripped thermal cutout, the cooling fan, a control or relay board, or the bake element. “LO” on the display only means it’s still preheating.
Check first: the door closes fully, a mode is set and Showroom Mode is off; then the breaker off for 30 seconds and back on. A slow preheat can be normal: Wolf says 208 V power can add 25 to 40 percent, against 240 V.
A fan won’t run, or won’t stop
Possible causes: often none. After preheat the convection fan runs only in a convection mode, Wolf says, and the cooling fan can’t be turned off: it’s there to stop the oven overheating.
Check first: pick a convection mode and listen. Rubbing, squawking, rattling, banging or a high-pitched noise isn’t normal.
Smoke, a smell or no heat after self-clean
Possible causes: smoke and a burning or oily smell during self-clean are normal, Wolf says. Stopping a cycle partway is discouraged, since it can cause damage, and an unfinished clean is on Wolf’s list for an oven that won’t heat.
Check first: take out the racks and rack guides before a cycle, or they discolor, and keep children away from the hot outside.
A cooktop zone blinks, or won’t heat
Possible causes: on an induction cooktop, a blinking control means it isn’t sensing a pan: nothing on the zone, or a pan that isn’t induction compatible. For an electric cooktop, Wolf lists no power, lock mode and the wrong cookware.
Check first: center an induction-ready pan on the zone and make sure the cooktop isn’t locked. Then the 30-second breaker reset.
A burner clicks but won’t light
Possible causes: Wolf lists a spill or a wet burner, a cap that isn’t seated, a pan too big for the burner, the gas supply, and the spark module, switch, electrode or igniter.
Wolf’s owner checks: let it dry, clear the burner holes with a toothpick, center the cap so it sits flat and check the knob isn’t stuck. After a long spell unused, turn a burner off if it hasn’t lit in 10 seconds, wait a minute and try again. For a gas burner, call or text us before you book.
The power went out with the oven on
Wolf’s advice for a gas oven: for safety, turn it off during an outage of any length. Wolf is plain about why: “There is no safe way to use a gas oven without power.”
Once the power is back: if a gas oven doesn’t relight on its own, Wolf says to turn the knob off and then back on. For a gas model, call or text us before you book.
If you smell gas
“Leave the house immediately. Do not use the telephone inside the house; go outside to call your gas supplier for assistance. Do not light a match. Do not turn off/on a light.” That’s the Florida Public Service Commission’s advice. Florida City Gas adds: never try to find the leak yourself, and once you’re in a safe place, call 911 and your gas company.
Still not right on an electric or induction model? For a gas model, call or text us before you book.
Text us what it’s doing How a visit goesWhich Wolf you have, and where its plate is
This page covers the built-in Wolf ranges, wall ovens and cooktops that Sub-Zero Group makes for the home, not Wolf Gourmet countertop appliances or commercial Wolf restaurant equipment. For a gas model, or any other Wolf appliance, call or text us before you book.
Ranges
A range has its oven under the cooktop, in one unit.
Open the oven door: the plate is at the bottom of the control panel, at the far right.
Some older ranges hide it under the cooktop instead; Wolf’s serial tag page shows where.
Wall ovens and cooktops
Oven series: E, M and the older L
Professional, Transitional and Contemporary are styles, not series: E Series ovens come in the first two, M Series in all three.
On an oven, open the door. A cooktop’s plate is on the bottom of the unit, so look from the cabinet underneath.
Every oven series
- M Series
- Near the bottom trim, on the left.
- E Series models SO3050, DO3050
- Near the bottom trim, on the left.
- E Series models SO30, DO30
- Below the control panel, on the right.
- L Series
- Below the control panel, on the right.
- Double ovens
- In the lower oven.
Send us the plate before the visit
Add a line about what it’s doing: which oven or zone, and any code on the display. With the model and serial number, we know which Wolf we’ll be working on.
Text a photo to (754) 285-8880What a Wolf visit involves
Tell us what it’s doing
Call or text us. The brand and the symptom are enough to start.
We find the fault
For one flat diagnostic fee, credited to the repair if you go ahead.
Get the price in writing
Before any work starts. No repair until you say yes.
We fix it
Only the work you approved, at the price you approved.
Get a written warranty
On every repair, with the terms spelled out.
Wolf repair questions
Not covered here? Call (754) 285-8880 Text the plate
Can an independent company repair my Wolf while it’s still under warranty?
For the first two years, covered repairs go through Wolf’s own service network, so start with Wolf’s service locator. From year three to five, Wolf still covers the parts on its list and the owner pays the labor; when someone outside Wolf’s network does the work, the owner gets the part from Wolf. Beaver Appliance is independent, not affiliated with Wolf. Wolf’s warranty has the full terms.
How can I find out how old my Wolf is?
Not from the rating plate: on Wolf ranges, wall ovens and cooktops it carries no manufacture date. Wolf asks owners to give the serial number to Sub-Zero’s Customer Care team, which can tell them the age. For the warranty, the day it was installed is the date that counts.
Is there a way to reset a Wolf oven?
Wolf’s usual first step for a code is to turn the oven’s circuit breaker off for 30 seconds, then on again. If the code comes back, Wolf says there’s no further troubleshooting for the owner, and codes differ from model to model. A photo of the display and the rating plate tells us what we’re looking at.
How long should a Wolf range or wall oven last?
Wolf says its appliances are tested for 20-plus years of everyday use. For pro-style ranges, Consumer Reports wrote in an article updated in January 2024 that “it almost always pays to make a repair.” Whether that holds for yours depends on the fault, which is why the diagnosis ends in a written price.
How is a Wolf repair priced?
By the fault. Beaver Appliance finds it for one flat diagnostic fee, credited to the repair if you go ahead, then puts the repair price in writing. Nothing is done until you agree.
Which Wolf appliances does Beaver Appliance repair?
Wolf ranges, wall ovens and cooktops, induction models included. Text us a photo of the rating plate first. For a gas model, or any other Wolf appliance, call or text us before you book.
Other brands and repairs
Where we work
Beaver Appliance repairs Wolf ranges, ovens and cooktops across South Florida: Broward County and nearby parts of Miami-Dade and Palm Beach counties. We’re based in Pompano Beach.