GE appliance repair, for the refrigerator, washer, dryer, dishwasher and range.
A brand we repair
Beaver Appliance, an independent company not affiliated with GE Appliances, repairs GE and GE Profile refrigerators and ice makers, washers, electric dryers, dishwashers, and electric ranges, cooktops and wall ovens in South Florida and Tampa Bay. A $69 diagnostic visit finds the fault, credited to the repair; the price is in writing before any work.
Call or text and we’ll give you the earliest time we have.
- Diagnostic visit
- $69, credited to the repair
- Price
- In writing, before any work
- Work done
- Only what you approve
- Google rating, South Florida
- 5.0 from 14 reviews


Kitchen and laundry repairs, in customers’ words
Refrigerator
“… They were professional, knowledgeable, and got our fridge fixed quickly. The technician took the time to diagnose the problem properly and had everything back up and running. …”
★★★★★ Joey C. Sep 2026, Google review Washing machine
“Aizat was very prompt and did a wonderful job fixing my washing machine. …”
★★★★★ Debbie B. Jul 2026, Google review Appliance repair
“… He diagnosed the problem quickly, explained what needed to be done, and got the job done right. …”
★★★★★ Arlene J. Aug 2026, Google review
The GE appliances we repair
GE and GE Profile, across South Florida and Tampa Bay.
What is your GE doing?
Tap a row for GE’s own first checks.
Refrigerator not cooling
First check: the light inside, and the controls, not switched off by accident. GE’s defrost cycle stops the compressor and fans for as long as 30 to 45 minutes, and after a setting change GE allows about 24 hours.
Call us if it’s still warm after those 24 hours.
Ice maker slow, or small hollow cubes
First check: the water filter, which GE says to change every 6 months; a clogged one gives small or hollow cubes. So can a reverse osmosis system under the sink, which GE says roughly halves the water pressure.
Call us if the filter is new and the ice still doesn’t come. More on ice maker repair.
Washer flashing a light, or showing H2O SUPPLY
GE publishes messages and lights for its washers, not a list of numbered codes. On a top-loader, Po or a flashing Rinse light: it took too long to pump the water out. H2O SUPPLY or a flashing Fill light: water isn’t coming in.
First check: for Po, Drain & Spin and a pinched drain hose. For H2O SUPPLY, both valves open, then wait out GE’s 3 or 4 minute lock-out: unplugging restarts it. More on GE washer repair.
Dryer slow, or hot to the touch
First check: the airflow at the outside wall cap while it runs. Weak airflow usually means a blocked duct, GE says, and the trapped heat leaves the dryer hot to the touch and slow. GE wants metal duct, never plastic.
Call us if the duct is clear and it’s still slow. For the duct, see dryer vent cleaning.
Dishwasher not draining: C1, C3 or FTD
In GE’s words, C1: the pump out during drain has exceeded 2 minutes. C3: the dishwasher will not drain. FTD or F56: failure to drain. A cup or two of water left in the bottom is normal.
First check: run the disposer, clean the air gap if you have one, straighten the drain hose. For C3, the breaker off about 30 seconds, then reset. Back again? GE says call for service. More on GE dishwasher repair.
Oven not heating, or showing a fault code
First check: Bake or Broil set, and a mechanical self-clean latch unlocked. A fault code is a technician’s job, GE says, though a minute or two with the breaker off can clear it.
While you wait, GE says keep it off at the breaker, on only long enough to use the cooktop.
Where GE puts the model number
One tag holds both numbers, and a GE or GE Profile model number always begins and ends with a letter.
Kitchen
- Refrigerator
- Inside the fresh food section, high on a side wall; on a side-by-side, maybe on the floor under the crispers. Ice makers use the fridge’s tag.
- Dishwasher
- On the front inside edge of the tub, left or right, or on the right side edge of the door.
- Range
- Behind the oven door on the front frame, or inside the drawer; on some, under the control panel or the left front coil.
- Cooktop
- Under the rear left or front right surface unit, or on the bottom of the cooktop.
- Wall oven
- Inside the door, on the front face of the oven.
Laundry
- Front-load washer
- Inside the door around the opening, or outside, low on the right side at the front.
- Top-load washer
- Under the lid by the right hinge; on some, the back of the control panel, the bottom left corner or the back.
- Dryer
- Door open, on the front face of the dryer compartment, left or right.
Text us the tag and the display
A photo of each and a line about the problem, and we know the model before we arrive.
Text a photo to (813) 513-1699What a GE repair visit involves
Tell us what it’s doing
Call or text us. The appliance, the symptom and any code on the display are enough to start.
We find the fault
For the $69 diagnostic visit, credited to the repair if you go ahead.
Get the price in writing
Before any work starts. No repair until you say yes.
We fix it
Only the work you approved, at the price you approved.
Get the paperwork
The appliance, the work done and the date, in writing.

Have ready: the model and serial number, any message or blinking light, and roughly when you bought it.
GE repair questions
Another question? Call (813) 513-1699 Text a photo
Is Beaver Appliance part of GE Appliances?
No. GE and GE Profile appliances are made by GE Appliances, a Haier company. Beaver Appliance is an independent repair company, not affiliated with GE Appliances and not sponsored or endorsed by it.
How is a GE repair priced?
A $69 diagnostic visit comes first. The technician finds the fault and writes down the price: go ahead and the $69 comes off it, say no and the visit is all you pay. Typical prices are on our pricing page.
Do you repair GE Profile appliances too?
Yes. GE Profile is a GE Appliances brand; GE’s dishwasher and front-load washer manuals cover both lines, with the same messages and codes. We repair both in South Florida and Tampa Bay: (754) 285-8880 (South Florida) or (813) 513-1699 (Tampa Bay).
How long does GE’s warranty last?
One year from the original purchase, parts and labor, on GE’s washers, dryers, dishwashers, refrigerators and ranges, done by GE’s own service network. Some models add longer terms on certain parts, such as ten years on a front-load washer’s motor (the part only) or five years on a GE Profile refrigerator’s sealed system. Past those terms, the repairer is your choice.
Is my GE appliance part of a recall?
CPSC’s recent GE recalls include JP3030 electric cooktops made July to September 2022, whose burners can stay on after being turned off (CPSC: switch it off at the breaker when not in use, and keep anything flammable and empty pans off it); six French door refrigerator models made February 2020 to August 2021, whose freezer handle can detach; freestanding and slide-in ranges sold May to July 2021, for a tip-over hazard (CPSC: put nothing on the open oven door until the bracket is checked); and GE Profile top-load washers sold 2003 to 2011, whose electrical component can overheat (CPSC: unplug it and stop using it). Older ones include GE dishwashers sold 2006 to 2009, a fire hazard (CPSC: stop using it and switch off its breaker). GE Appliances handles each remedy; each notice lists the models. On CPSC’s site: Cooktop recall Refrigerator recall Range recall Washer recall Dishwasher recall
Other brands and repairs
Where we work
Beaver Appliance repairs GE appliances across South Florida: Broward County and nearby parts of Miami-Dade and Palm Beach counties. Call or text (754) 285-8880.
- Appliance repair in South Florida
- Pompano Beach
- Fort Lauderdale
- Boca Raton
- Miami
- Deerfield Beach
- Coral Springs
- Coconut Creek
- Lighthouse Point
- Delray Beach
- Parkland
- Margate
- Plantation
Beaver Appliance repairs GE appliances across Tampa Bay: Pasco and Hillsborough counties and nearby parts of Pinellas and Hernando counties. Call or text (813) 513-1699.












