Beaver Appliance

GE dishwasher repair, including GE Profile.

GE Appliances A brand we repair

Beaver Appliance repairs GE and GE Profile dishwashers across South Florida and Tampa Bay, as an independent company not affiliated with GE Appliances. The $69 diagnostic visit is credited to the repair; you get the price in writing before any work.

Call or text and we’ll give you the earliest time we have.

Diagnostic visit
$69, credited to the repair
Price
In writing, before any work
Work done
Only what you approve
Google rating, South Florida
5.0 from 14 reviews
The top of a white dishwasher panel and its brass bar handle, under a stone countertop
A built-in dishwasher behind a white shaker panel with a brass bar handle, under a stone countertop by the sink

The diagnosis, in customers’ words

Our South Florida Google profile: rated 5.0 from 14 Beaver Appliance reviews.

  • Appliance repair

    “… He diagnosed the problem quickly, explained what needed to be done, and got the job done right. …”

    ★★★★★ Arlene J. Aug 2026, Google review
  • Refrigerator

    “… The technician took the time to diagnose the problem properly and had everything back up and running. …”

    ★★★★★ Joey C. Sep 2026, Google review

What is your GE dishwasher doing?

A code or word on the display? See the code table.

Water left in the tub

First check: one or two cups is normal, GE says. More: run the disposer, clean the air gap, check the hose under the sink for kinks.

Call us if water still covers the tub floor.

Water on the floor

First check: suds push water out, GE says: automatic dishwasher detergent only, no spilled rinse aid, and the door gasket in its channel.

Call us if water comes from underneath, or LEAK DETECTED shows.

Won’t start, or hums without filling

First check: Control Lock, the door latch, or a countdown like 2H (Delay Start). Top-control models: close the door within four seconds of pressing Start.

Humming after a week or more unused? GE says the pump seals can dry out and stick; weekly use prevents it. Its fix: citric acid in hot water, left in the sump 15 to 30 minutes.

Call us if it still won’t start or fill.

Grit, film or food on the dishes

First check: water at 120°F or more, and clean filters. Scrape plates, but skip hand-rinsing: GE says detergent enzymes need food soil to bind with.

Call us if it still leaves food behind.

Dishes still wet

First check: rinse agent, and a heated dry option. Models with a fan dry 90 more minutes after the Clean light, unless the door opens.

Call us if they’re still wet after that.

Door won’t latch, or won’t open

First check: both racks pushed fully back, nothing pressing on the inner door. Stuck shut after a hot dry? GE says steam can form a vacuum seal: let it cool several minutes.

Call us if the latch handle moves freely without catching.

GE dishwasher error codes

Photograph the code and the model label, then switch the breaker off for a minute or two.

GE says that can clear one, though most fault codes need a technician, and not every model has every code.

Code What GE says it means First check, then
FTD F56

Failure to drain

The drain hose, the air gap, the disposer.

C1

Pumping out took over 2 minutes

Clean the air gap, reposition the hose, run the disposer.

C2

The whole pump-out passed 7 minutes

Press Reset to stop the beep.

C3

It won’t drain

Breaker off about 30 seconds, then reset; back again, call us.

C4

Filled twice after a power failure, a stuck or failed float, or a clogged drain or sump

Tap the float cover (front left of the tub floor); clear the sump.

C5

Pump-out time too short

Water on, run the cycle again, tap the float cover.

C6

Water temperature too low

At least 120°F: run the nearest faucet hot first; no showers or laundry meanwhile.

C7

Water temperature sensor circuit not working

The C3 breaker reset.

C8

Something blocks the detergent cup from opening fully

Move the utensil or pan in its way.

Cup Open

The detergent cup isn’t closed

Latch it; pressing Start again overrides.

H2O

Low water

Unkink the inlet hose. Only on 1-Hour Wash? GE says book service.

LEAK DETECTED

A possible leak; the cycle is cancelled

GE says contact service. Beeping too? Cut the power until it’s repaired.

999

Floor Protect with Alert: a possible leak. Others: the control needs a reset Depends on the model

Floor Protect: it won’t start, so call us.

PrS

Invalid pressure sensor signal; it can’t start, or cancels

GE recommends service.

PF

The power failed No service needed

Choose the cycle and press Start.

1H 2H 3H …

Delay Start, counting down the hours Not a fault

It starts at zero.

The code and the label, in one text

Open the door: GE puts it on the tub’s front edge, left or right, or the door’s right side.

Text a photo to (813) 513-1699

How a GE dishwasher visit works

  1. Tell us what it’s doing

    Call or text us. The appliance, the symptom and any code are enough to start.

  2. We find the fault

    For the $69 diagnostic visit, credited to the repair if you go ahead.

  3. Get the price in writing

    Before any work starts. No repair until you say yes.

  4. We fix it

    Only the work you approved, at the price you approved.

  5. Get the paperwork

    The appliance, the work done and the date, in writing.

GE dishwasher questions

Something else? Call (813) 513-1699 Text a photo

Why is my GE dishwasher beeping, or its Start light blinking?

GE says beeps or blinking cycle lights mean the cycle was interrupted, usually by the door opening mid-cycle or not shutting fully. Press Start once and close the door within four seconds. One beep a minute: the door was left open while running.

How do I reset a GE dishwasher?

Switch the circuit breaker off for a minute or two; GE notes that turning the dishwasher off doesn’t cut its power. If the code returns, GE says service may be needed.

Where is the filter in a GE dishwasher?

Under the lower rack: the Ultra Fine filter twists counterclockwise and lifts out, then the Fine filter. GE’s current manual says every other month or more, in warm soapy water. Older GE models, and some current ones, clean themselves, usually with no removable filter.

What does GE’s dishwasher warranty cover?

One year from purchase: GE covers any part that fails from a defect in materials or workmanship, and the labor to replace it, with proof of the purchase date. The air gap at the sink isn’t covered; GE says it’s plumbing, not the dishwasher.

GE and dishwasher pages

Where we work

Beaver Appliance repairs GE dishwashers across South Florida: Broward County and nearby parts of Miami-Dade and Palm Beach counties. Call or text (754) 285-8880.

Beaver Appliance repairs GE dishwashers across Tampa Bay: Pasco and Hillsborough counties and nearby parts of Pinellas and Hernando counties. Call or text (813) 513-1699.