Beaver Appliance

LG washer repair, front-load and top-load.

LG A brand we repair

Beaver Appliance repairs LG front-load and top-load washers in South Florida and Tampa Bay, as an independent company not affiliated with LG. A $69 diagnostic visit finds the fault, credited to the repair; the price is in writing before any work.

Call or text and we’ll give you the earliest time we have.

Diagnostic visit
$69, credited to the repair
Price
In writing, before any work
Work done
Only what you approve
Google rating, South Florida
5.0 from 14 reviews
The round glass door and steel drum of a white front-load washer, a laundry basket at its side
A white front-load washer with its door shut and a wicker laundry basket beside it on a tiled floor

Washing machines and more, in customers’ words

Our South Florida Google profile: rated 5.0 from 14 Beaver Appliance reviews. None names an LG yet, so our picks are other jobs.

  • Washing machine

    “Aizat was very prompt and did a wonderful job fixing my washing machine. …”

    ★★★★★ Debbie B. Jul 2026, Google review
  • Appliance repair

    “… He diagnosed the problem quickly, explained what needed to be done, and got the job done right. …”

    ★★★★★ Arlene J. Aug 2026, Google review

What is your LG washer doing?

Showing a code? Start with the code table.

Water left in the drum

First check: the drain hose, unkinked. On a front-loader, run Spin Only: LG says the pump hums for 15 seconds; if so, unplug it, put a bucket and a towel under the pump filter and open it slowly: LG warns water pours out while the drum holds any. After a hot cycle, let it cool.

Call us if it stays silent, or a top-loader shows OE again.

Won’t spin, clothes soaking wet

First check: an even load; LG says a small one can’t balance either, so add items. Level a top-loader until its tub sits centered.

Call us if an empty Rinse and Spin still stops.

Won’t fill, or fills slowly

First check: taps fully open, hoses unkinked, and the inlet filters clean (taps off before you unscrew a hose). LG says leak-limiting hoses “can trip falsely and prevent the washer from filling”.

Call us if IE comes back with the taps wide open.

Water on the floor

First check: each hose end, then the door seal. Suds at a front-loader’s back are detergent build-up at LG’s safety air vent: less HE detergent, then Tub Clean.

Call us if the seal is torn, or it leaks after three Tub Clean cycles.

Shakes, bangs or rattles

First check: a new front-loader’s shipping bolts out; a load about two thirds full. Banging while it fills is water hammer, “a problem with the plumbing in your home”, LG says.

Call us if the empty drum is still noisy turned by hand.

A locked door, or a lid that won’t lock

First check: LG locks a front-loader while it’s hot inside, holding water or spinning. Heat clears in two to three minutes, water with Spin Only. Never force it, LG says.

Call us if it stays locked after the cycle, or a top-loader shows dL, lid shut.

LG washer codes

Photograph the display and the model label first: some LG codes mean one thing on a front-loader, another on a top-loader.

Some top-loaders blink lights instead; photograph those too. Try a row’s first step once; if the code returns, text us both photos.

Code What LG says it means First check, then
OE E03 E21

The wash water can’t drain

Drain hose unkinked; then a front-loader’s pump filter, unplugged, a bucket under it.

IE E02 E10

The tub didn’t fill in time

Taps fully open, hoses straight; taps off to clean the inlet filters.

UE uE Ub

Unbalanced load; uE: a top-loader still retrying

Spread it out; add items to a small load.

LE

Front-load: the tub failed to spin. Top-load: motor locked Differs by type

Fewer clothes, nothing stuck in the tub.

dE dE1 dE2 dEL dL E01 E30

The door or lid isn’t shut, or shut but not locked

Free anything caught; close it firmly.

FE

Overfilling: the water level is too high

Shut both taps, drain it; a top-loader stays unplugged until repaired.

CE

Front-load: motor over-current. Top-load: the drum didn’t reach 20 RPM Differs by type

Front-load: one restart. Top-load: unplug it, call us.

tE

Front-load: heating error. Top-load: thermistor error Differs by type

Front-load: drain, one restart. Top-load: service.

PE

The water level sensor isn’t working right

Front-load: one restart. Top-load: taps off, unplugged, service.

E6 LE1 Eb D3

Top-load: clutch or coupling; E6 or LE1 can be a coin at the pulsator

Empty the tub; check around the pulsator.

AE

Front-load: a leak inside tripped the safety switch

The inlet hose; then off 60 seconds.

vS u5 uS

Front-load: a possible vibration sensor issue

Start/Pause; back again, one restart.

PS P5 PF

A power supply issue; PF, power cut mid-cycle

A wall outlet: no power strip or extension cord.

Sud

Too many suds: a suds cycle adds about two hours No service needed

Less HE detergent next time.

tCL CL dr

A reminder or a feature at work Not a fault

tCL: run Tub Clean. CL: Child Lock; switching off won’t clear it. dr: a paused top-loader draining.

Text us both photos

LG’s label sits behind a front-loader’s door, near the top; on a top-loader, under the lid or on the back.

Text a photo to (813) 513-1699

What an LG washer visit involves

  1. Tell us what it’s doing

    Call or text us. The appliance, the symptom and any code are enough to start.

  2. We find the fault

    For the $69 diagnostic visit, credited to the repair if you go ahead.

  3. Get the price in writing

    Before any work starts. No repair until you say yes.

  4. We fix it

    Only the work you approved, at the price you approved.

  5. Get the paperwork

    The appliance, the work done and the date, in writing.

LG washer questions

Didn’t see yours? Call (813) 513-1699 Text the code

What does UE mean on an LG washer?

LG says the load is bunched on one side of the drum. A top-loader shows lower-case uE while it rebalances on its own, then UE after three tries. Spread the load; if UE returns with the drum empty, LG says it needs a repair.

What does LE mean on an LG washer?

On a front-loader, LG says the tub failed to spin: too big a load, or something stuck in it. Its top-load manual calls LE a motor locked error. Take laundry out, check for a coin, let it rest; LG’s wait varies by model.

How do I reset an LG washer?

LG’s reset: power off at the plug or breaker, hold Start/Pause five seconds, power on, try again. Once is enough; if the code returns, text us the display and the model label.

Is my LG washer still under warranty?

LG covers parts and labor for the first year. Its 10-year term on the direct drive motor, on the LG washers we looked up, covers the part only: “You are responsible for any applicable labor cost,” LG’s manual says.

More on LG and washers

Where we work

Beaver Appliance repairs LG washers across South Florida: Broward County and nearby parts of Miami-Dade and Palm Beach counties. Call or text (754) 285-8880.

Beaver Appliance repairs LG washers across Tampa Bay: Pasco and Hillsborough counties and nearby parts of Pinellas and Hernando counties. Call or text (813) 513-1699.