Beaver Appliance

GE oven and range repair, electric ranges, wall ovens and cooktops.

GE Appliances A brand we repair

Beaver Appliance repairs GE and GE Profile electric ranges, wall ovens and cooktops across South Florida and Tampa Bay, as an independent company not affiliated with GE Appliances. A $69 diagnostic visit finds the fault, credited to the repair; the price is in writing before any work.

Call or text and we’ll give you the earliest time we have.

Diagnostic visit
$69, credited to the repair
Price
In writing, before any work
Work done
Only what you approve
Google rating, South Florida
5.0 from 14 reviews
The bar handle and glass window of a closed stainless oven door
The closed door of a stainless wall oven, its bar handle across the top and the glass window below

GE and other repairs, in customers’ words

Our South Florida Google profile: rated 5.0 from 14 Beaver Appliance reviews.

  • Monogram refrigerator

    “Brandon fixed my GE Monogram refrigerator freeze. He was very prompt and professional. I would recommend him for your repair.”

    ★★★★★ Maureen K. Jun 2026, Google review
  • Appliance repair

    “… He diagnosed the problem quickly, explained what needed to be done, and got the job done right. …”

    ★★★★★ Arlene J. Aug 2026, Google review

What is your GE oven or cooktop doing?

Showing a code? See the code table. A gas range? Call or text us before you book.

The oven won’t heat, but the cooktop does

First check: Bake or Broil set and Start pressed, a self-clean latch unlocked, then GE’s reset: the breaker off one minute.

A glowing spot on the bake element? Oven off, and don’t use it, GE warns.

Call us if the oven stays cold.

A surface element won’t heat

First check: power off and the coil cool, swap it into a same-size socket. GE coils from 2018 on pause near 450°F and glass elements cycle: both normal.

Call us if the coil works in the other socket, or an element stays dark. Won’t switch off? Breaker off, GE says.

Slow to preheat, or the wrong temperature

First check: GE allows 15 to 20 minutes with a hidden element, 5 to 10 with a visible one; a 208 volt hookup rather than 240 “will increase the pre-heat time by 25%.” Baking off? GE’s biscuit test, then calibration.

Call us if the gasket is torn, or it still bakes off.

Dead keys, or a blank display

First check: Lock Controls held three seconds (a wall oven’s 0 pad). Blank: the clock switched off, Sabbath Mode or a tripped breaker.

Call us if it stays blank with the power on.

The door stays locked after a self-clean

First check: let it cool, then power off 30 seconds. Still locked, no food inside? GE’s step: a 1 to 2 hour self-clean, then about 30 minutes to cool. Never force the latch.

Call us if the door stays locked.

A cracked or pitted glass top

First check: scratches can look like cracks, GE notes.

Call us if it’s cracked or pitted, and stop using it; on a range the oven too, since GE says it vents onto the glass.

GE oven and range fault codes

Photograph the code and the model label. For any F code, GE’s manuals say:

Cancel/Off, an hour to cool, then use it. Repeats? All power off at least 30 seconds; back again, call for service. Meanwhile, GE says, keep the breaker off except for the cooktop.

Code What GE says it means First check, then
F2 F20

Overheated past a preset limit, cause unknown

Reset; if back, breaker off till serviced.

F3 F4

Usually an oven sensor that needs replacing

Reset; if back, breaker off till serviced.

F0 F1 F6 F7

Usually a problem with the keypanel

Reset; if back, breaker off till serviced.

F5 F8 FF

Usually an electronic control to replace

Reset; if back, breaker off till serviced.

F9 FC

Usually a failed part in the door lock circuit

Never force the door. Reset; if back, breaker off till serviced.

F350

Usually the upper cooling fan circuit, or an obstruction in the fan

Reset; if back, breaker off till serviced.

F97 F96 F7X

Usually an internal component to replace

Reset; if back, breaker off till serviced.

Bad Line

Powered, but wired wrong

An installer or electrician fixes the wiring, GE says.

LOC

Child Lockout is on Not a fault

Hold Lock Controls (on wall ovens, the 0 pad) three seconds.

ERR

A setting entered wrong, or the oven on Celsius, GE says Not a fault

Enter it again; your manual switches Celsius back.

F

Induction cooktop: the pan is lifted, missing or off center Not a fault

Center a pan a magnet sticks to.

Text the code and the label

GE’s manuals: behind a range’s door or drawer, or a wall oven’s door; under a cooktop.

Text a photo to (813) 513-1699

How a GE range visit works

  1. Tell us what it’s doing

    Call or text us. The appliance, the symptom and any code are enough to start.

  2. We find the fault

    For the $69 diagnostic visit, credited to the repair if you go ahead.

  3. Get the price in writing

    Before any work starts. No repair until you say yes.

  4. We fix it

    Only the work you approved, at the price you approved.

  5. Get the paperwork

    The appliance, the work done and the date, in writing.

A technician in a navy polo kneeling at the open lower oven of a built-in wall oven, one hand on the door

Moved the range? Re-engage the anti-tip bracket, GE’s manual says, and never fully remove the leveling legs.

How pricing works Warranties, in plain words

GE oven and range questions

Not covered here? Call (813) 513-1699 Text the code

What does F2 mean on a GE oven?

In GE’s words, “the oven temperature has exceeded a preset threshold,” for an unknown reason; F20 means the same.

Why does my GE oven show ERR, or stop at 290?

GE gives ERR two meanings: an invalid entry, or the oven set to Celsius, which also caps the setting at 290. Your manual shows the switch back.

Does GE’s warranty cover a range, wall oven or cooktop?

One year from the original purchase, parts and labor, on GE’s current sheets for all three. From January 2022 the range and cooktop sheets exclude glass damage “due to impact or misuse.” While it’s covered, GE’s own service network does the repair.

Has GE recalled any electric ranges or cooktops?

CPSC lists two, 2015 through November 2026. Its cooktop recall covers JP3030 knob-control radiant cooktops made July to September 2022, whose burners can stay on after use. Until the free knob replacement, CPSC says keep it off at the breaker when not in use, nothing flammable or empty cookware near it. Its 2021 range recall covers some freestanding and slide-in ranges sold May to July 2021 that can tip without a secured anti-tip bracket; until it’s inspected, CPSC says put nothing on the open door.

More GE and oven pages

Where we work

Beaver Appliance repairs GE electric ranges, wall ovens and cooktops across South Florida: Broward County and nearby parts of Miami-Dade and Palm Beach counties. Call or text (754) 285-8880.

Beaver Appliance repairs GE electric ranges, wall ovens and cooktops across Tampa Bay: Pasco and Hillsborough counties and nearby parts of Pinellas and Hernando counties. Call or text (813) 513-1699.