Whirlpool dryer repair, for electric models.
A brand we repair
Beaver Appliance repairs electric Whirlpool clothes dryers in South Florida and Tampa Bay, as an independent company not affiliated with Whirlpool. A $69 diagnostic visit finds the fault, credited to the repair; the price is in writing before any work.
Call or text and we’ll give you the earliest time we have.
- Diagnostic visit
- $69, credited to the repair
- Price
- In writing, before any work
- Work done
- Only what you approve
- Google rating, South Florida
- 5.0 from 14 reviews


Whirlpool and laundry jobs, in customers’ words
Older Whirlpool refrigerator
“… He analyzed the cooling problem on my older model Whirlpool refrigerator. He communicated the issues and answered all my questions. …”
★★★★★ Christine F. Aug 2026, Google review Washing machine
“Aizat was very prompt and did a wonderful job fixing my washing machine. …”
★★★★★ Debbie B. Jul 2026, Google review
What is your Whirlpool dryer doing?
Code on the display? See the code table.
Runs, but no heat
First check: both breakers. An electric Whirlpool uses two, so it can tumble cold with one tripped. Whirlpool’s test: an empty heated timed cycle for 5 minutes, then feel inside.
Call us if it still runs cold. L2 on the display points to the home’s power.
Slow to dry
First check: the lint screen, every load. Unplugged, check the duct behind it for kinks. Running, the outside hood should blow like a hair dryer on high, Whirlpool says.
Call us if loads stay damp with the screen and duct clear.
Won’t start
First check: hold Start two to five seconds; a tap may not engage the motor, Whirlpool says.
Call us if that doesn’t start it. A breaker that keeps tripping needs an electrician, Whirlpool says.
Drum won’t turn
First check: the load, one-half to three-quarters full, since Whirlpool says overloading restricts tumbling. Door latched, dryer level, and never reach in while the drum is moving, its manual warns.
Call us if a normal load won’t tumble. F7 E1 is Whirlpool’s motor system code.
Thumps, rattles or squeals
First check: a light thump after a while unused is flattened drum rollers, Whirlpool says, and fades. Scraping? With it off, check the drum’s front and rear seams for coins.
Call us if it squeals. Whirlpool says lint inside can make the belt and pulleys squeal, a service call with the back panel off.
A burning smell
First check: a new dryer can smell semi-burning or oily, Whirlpool says; run it empty about 15 minutes. Not new? Stop the dryer until the vent and the dryer have been checked. Smoke, flames or a smell of gas: get everyone out, then call 911.
Call us before you run it again.
Whirlpool dryer codes
Photograph the code and the model label first.
Some codes mean other things on other Whirlpool machines. F3 then E2, shown in turn, is one code.
| Code | Whirlpool’s meaning First step, then |
|---|---|
| AF Check Vent F4 E3 | Restricted airflow: a clogged screen or vent, or a crushed or kinked duct Keeps running Touch any key to clear it. Clean the screen; unplugged, check the duct behind, then the outside hood. Still there? Whirlpool says clean the whole vent run: our dryer vent cleaning. |
| L2 F4 E4 | Low or no line voltage: the home’s supply keeps the heater off Touch any pad to clear it; check both breakers. Still there, it’s an electrician’s job, Whirlpool says. |
| F3 E2 F3 E5 | Moisture sensor: five loads in a row without a sensor reading Press Power to clear it, and level the dryer; single items can miss the sensors. Back again, a visit. |
| F4 E1 F3 E1 F3 E3 | The heater or its relays; F3 E1 and F3 E3, the exhaust and inlet thermistors Breaker off one minute, then a timed dry cycle. Back again, a visit. |
| F6 E1 F7 E1 F1 E4 F2 E1 F2 E2 F2 E5 | The control, keypad, user interface or wiring; F7 E1, the motor system Breaker off a minute, back on, then a timed dry cycle. Still there, a visit. |
| F1 E3 F1 E5 F2 E4 | The control unit or user interface, or its wiring Touch Power, pick a cycle, hold Start/Pause; failing that, unplug it, Whirlpool says. Back again, a visit. |
| PF | A power failure stopped the cycle Hold Start to restart, or Power to clear. After an outage, breaker off one minute. |
| ERR | The door isn’t fully closed and latched Push it until it catches; with two latches, both must hold. |
| Loc | The Control Lock is on Not a fault Hold its key 3 seconds; it may share a button. |
| F9 E2 F6 E2 F6 E3 FC E1 | No meaning published; Whirlpool gives only a reset Breaker off one minute, then a timed dry cycle. Still showing, a visit. |
| F01 F22 F28 F70 E1 E2 E3 F1 E1 | No meaning published, only a reset Breaker off five minutes, then a timed dry cycle. Back again, a visit. |
Send us the code and the label
Whirlpool puts it inside the door, on the rim of the opening.
Text a photo to (813) 513-1699Your Whirlpool dryer visit
Tell us what it’s doing
Call or text us. The appliance, the symptom and any code are enough to start.
We find the fault
For the $69 diagnostic visit, credited to the repair if you go ahead.
Get the price in writing
Before any work starts. No repair until you say yes.
We fix it
Only the work you approved, at the price you approved.
Get the paperwork
The appliance, the work done and the date, in writing.
Whirlpool dryer questions
Another question? Call (813) 513-1699 Text a photo
What does AF or Check Vent mean on a Whirlpool dryer?
Whirlpool reads AF, F4 E3 and a lit Check Vent as restricted airflow; the dryer keeps running, only slower.
How do I reset a Whirlpool dryer?
There is no single reset: Whirlpool’s step depends on the code, from the breaker off one or five minutes to Power, Start/Pause or any key. The pages we read name no reset button. Follow the code’s row in our table.
Why is my new Whirlpool dryer still slow?
Whirlpool says a new dryer on old house venting may still dry slowly. It wants the vent cleaned every one to two years.
Is my Whirlpool dryer still under warranty?
Whirlpool covers a new dryer for one year from delivery, parts and labor. During that year Whirlpool arranges the repair, so start with Whirlpool. Its manual adds that service calls caused by improper venting “are not covered by the warranty and will be paid by the customer, regardless of who installed the dryer.” A clogged duct is a dryer vent cleaning, not a warranty repair.
More on Whirlpool and dryers
Where we work
Beaver Appliance repairs electric Whirlpool dryers across South Florida: Broward County and nearby parts of Miami-Dade and Palm Beach counties. Call or text (754) 285-8880.
- Appliance repair in South Florida
- Pompano Beach
- Fort Lauderdale
- Boca Raton
- Miami
- Deerfield Beach
- Coral Springs
- Coconut Creek
- Lighthouse Point
- Delray Beach
- Parkland
- Margate
- Plantation
Beaver Appliance repairs electric Whirlpool dryers across Tampa Bay: Pasco and Hillsborough counties and nearby parts of Pinellas and Hernando counties. Call or text (813) 513-1699.







