Beaver Appliance

LG dryer repair, for electric models.

LG A brand we repair

Beaver Appliance repairs electric LG dryers in South Florida and Tampa Bay, as an independent company not affiliated with LG. A $69 diagnostic visit finds the fault, credited to the repair; the price is in writing before any work.

Call or text and we’ll give you the earliest time we have.

Diagnostic visit
$69, credited to the repair
Price
In writing, before any work
Work done
Only what you approve
Google rating, South Florida
5.0 from 14 reviews
A front-load dryer with its door open, the empty drum inside
A white front-load dryer with its door swung open beside a matching washer in a bright laundry room

Finding the fault, in customers’ words

Our South Florida Google profile: rated 5.0 from 14 Beaver Appliance reviews. None names an LG yet, so our picks are other jobs.

  • Repair visit

    “… He knows what’s the problem and he did a great job. Nice guy very polite.”

    ★★★★★ Dale K. Sep 2026, Google review
  • Appliance repair

    “… He diagnosed the problem quickly, explained what needed to be done, and got the job done right. …”

    ★★★★★ Arlene J. Aug 2026, Google review

What is your LG dryer doing?

A code on the display? Jump to the code table.

Tumbles, but no heat

First check: a tripped breaker or blown fuse; never fit a bigger fuse, LG says. Energy Saver starts without heat, which is normal. After 30 seconds, feel inside: warm means it works.

Call us if it stays cold. If LG’s Installation Test numbers stay flat or wander, LG says “you’ll need to schedule a repair.”

Damp loads, or it stops early

First check: clear the lint filter and hold it to a light; still clogged, LG says wash it in warm, soapy water. Wipe the sensor bars below it with a damp cloth; let them dry.

Call us if loads stay damp with the filter, bars and duct clean.

Won’t start, or no power

First check: CL means Child Lock; hold its button 3 seconds. Dark display? Breaker off (an electric LG uses two), plug firmly in its grounded outlet, no extension cord, breaker on after 5 seconds.

Call us if the drum light works but the dryer won’t power on.

Drum won’t turn, or stops

First check: about half full is right, LG says. Packed too tight, the drum may not turn; a tiny load ends early. Door opened mid-cycle, dE showing? Shut it, press Start/Pause.

Call us if the empty drum still won’t turn after Start/Pause.

Thumps, clicks or squeals

First check: empty every pocket; LG warns coins, keys or lighters can damage the dryer or create a fire hazard. Zip, button and turn clothes inside out. Heavy wet items thud, which LG calls normal.

Call us if it screeches like scraping metal; LG says internal parts may need inspecting.

A burning smell

First check: a new LG can smell hot in its first cycles, LG says, and that fades. Otherwise, a chemical or burning smell or a strange sound: unplug it immediately, LG’s manual says. Smoke, flames or a smell of gas: get everyone out, then call 911.

Call us with it unplugged. A clogged lint filter can cause odors too, LG says, so clean it before the next load.

LG dryer codes

Photograph the display and the model label first: LG’s own manuals print d90 as dGO.

Two vent signals, two levels: Flow Sense bars warn, while d80, d90 and d95 mean stop using the dryer. Models with no display blink lights instead; photograph those too.

Code LG’s meaning Try this once, then
d80 d90 d95

The exhaust duct is 80, 90 or 95% clogged

“Do not use the appliance until the exhaust system has been cleaned,” LG’s manual says. Our dryer vent cleaning takes in the full duct run.

Flow Sense 2 or 4 bars

The exhaust is severely restricted

Still usable, LG says, just slower and using more energy. Get the duct cleaned now.

tE1 tE2 tE3 tE4 tE5 tE6 tE7

A temperature sensor failure

Switch it off; LG’s manual says call for service.

HS H5

Humidity sensor error; a cycle then runs two and a half hours

Wipe the sensor bars below the filter with a damp rag; let them dry.

dE

Door error: it isn’t fully closed

Push the lint filter all the way in, free any clothing, close the door firmly.

F0 INSERT FILTER

The lint filter is out

Seat it again; LG says never run the dryer without it.

nP

No current reaching the heater; LG points to the home’s wiring

Breaker off 10 seconds or more; still there, an electrician checks the outlet.

PS

Improper voltage in the power cord

Breaker off 10 seconds; on a new install, LG says call the installer.

PF

Often seen after a power outage

LG’s reset, in the questions below; if PF stays, a visit.

EE

A control board memory problem

Unplug it for 10 minutes; back again, a visit.

CL

Child Lock is on Not a fault

Hold the Child Lock button for 3 seconds.

Text us both photos

Open the door: LG puts the silver model label on the front panel behind it.

Text a photo to (813) 513-1699

How an LG dryer visit goes

  1. Tell us what it’s doing

    Call or text us. The appliance, the symptom and any code are enough to start.

  2. We find the fault

    For the $69 diagnostic visit, credited to the repair if you go ahead.

  3. Get the price in writing

    Before any work starts. No repair until you say yes.

  4. We fix it

    Only the work you approved, at the price you approved.

  5. Get the paperwork

    The appliance, the work done and the date, in writing.

LG dryer questions

Still wondering? Call (813) 513-1699 Text a photo

What does d80 mean on an LG dryer?

LG reads d80, d90 and d95 as an exhaust duct 80, 90 or 95 percent clogged. Its manual treats them as a stop, since running with badly restricted exhaust “could result in a fire or other property damage.” Lit Flow Sense bars are the earlier warning.

Why is Flow Sense still on after the vent was cleaned?

Flow Sense needs several cycles in a row to register the better airflow, LG says, before the bars reset. Still lit more than five cycles after the duct was cleared? LG says call for service.

How do I reset an LG dryer?

LG’s reset needs no special button: unplug the dryer or switch off its breaker, hold Start/Pause for 5 seconds while it has no power, then restore power. A code that survives the reset may mean a repair, LG says; text us a photo of it.

Is my LG dryer still under warranty?

LG covers a new dryer for one year, parts and labor. The drum gets three years on the electric models we looked up, but after the first year LG pays for the part only and the labor is yours. While it’s covered, start with LG.

More LG and dryer pages

Where we work

Beaver Appliance repairs electric LG dryers across South Florida: Broward County and nearby parts of Miami-Dade and Palm Beach counties. Call or text (754) 285-8880.

Beaver Appliance repairs electric LG dryers across Tampa Bay: Pasco and Hillsborough counties and nearby parts of Pinellas and Hernando counties. Call or text (813) 513-1699.