Beaver Appliance

GE dryer repair, electric GE and GE Profile models.

GE Appliances A brand we repair

Beaver Appliance repairs electric GE dryers in South Florida and Tampa Bay, as an independent company not affiliated with GE Appliances. A $69 diagnostic visit finds the fault, credited to the repair; the price is in writing before any work.

Call or text and we’ll give you the earliest time we have.

Diagnostic visit
$69, credited to the repair
Price
In writing, before any work
Work done
Only what you approve
Google rating, South Florida
5.0 from 14 reviews
A front-load dryer with its door swung open and the empty drum inside, a washer beside it
A white front-load dryer with its door open beside a matching washer in a bright laundry room

The visit and the price, in customers’ words

Our South Florida Google profile: rated 5.0 from 14 Beaver Appliance reviews.

  • Repair visit

    “… He knows what’s the problem and he did a great job. Nice guy very polite.”

    ★★★★★ Dale K. Sep 2026, Google review
  • Price and service

    “Great price and service! I would definitely work with this company again.”

    ★★★★★ Topher R. Aug 2026, Google review

What is your GE dryer doing?

Check Vent lit? See the message table.

Runs, but stays cold

First check: switch the breaker off, then on. GE says it can be partly tripped yet look fine, leaving an electric dryer running cold. Pick a drying cycle, not Fluff.

Call us if it still runs cold.

Slow to dry, or still damp

First check: a clean lint filter every load. Eco Dry, a default on some models, can leave clothes slightly damp, GE says: pick More Dry. On 120 volts, GE says, drying takes up to three times longer.

Call us if it’s still slow with the filter and vent clear.

Won’t start

First check: the plug fully in, the door shut tight, Start pressed fully, the breaker on. A 1 or 2, or Controls lit? See the table.

Call us if it still won’t run.

Runs, but the drum won’t turn

First check: the load. Heavy wet towels or jeans can make the drive belt slip, GE says; take some out.

Call us if it still won’t turn. Unplug it and try the empty drum: if it turns freely, GE says the belt may be broken or loose.

Thumps, hums or chirps

First check: a squeak in the first seconds is normal, GE says. Unplug it, check it’s level, and look under the lint filter for objects, in work gloves: the edges can be sharp.

Call us if it thumps, hums, chirps or squeaks once hot. GE says stop using it until it’s checked: running on can wear other parts.

A burning smell

Smell burning? Stop the dryer until the vent and the dryer have been checked. Smoke, flames or a smell of gas: get everyone out, then call 911.

Call us with it off. The exception is a new dryer’s first runs: GE calls an oily or burning smell normal then, and says run it empty 20 minutes.

GE dryer lights and messages

First, photograph the display and the model label.

GE publishes no numbered dryer codes; it explains these lights instead.

On the display What GE says it means First check, then
Check Vent Vent Blocked

Low airflow, from a vent that may be blocked or restricted; Vent Blocked on some GE Profile models

The lint filter, then the vent as soon as you can, GE says. Our vent cleaning covers the full duct run, airflow checked before and after.

Vent Health 01 02 03

A vent test on some GE Profile models: 01 clean, 02 may need attention, 03 highly restricted

Empty drum, clean filter: hold Time and Level 3 seconds, close the door, press Start. 02 or 03: clean the vent.

00

Vent test: the air around it is above 85°F, so the result is invalid. Drying: Wrinkle Care Two meanings

Retest below 85°F. Wrinkle Care runs about 60 minutes.

Filter

Clean Lint Filter or Check Filter, lit for 15 seconds after a cycle Not a fault

Clean it every load; never run the dryer without it, GE says.

Controls lock icon

The dryer is locked; the light blinks once if you press a button Not a fault

Hold 3 seconds: ecoDry on a GE Profile PTD, Light on a GFD55 or PFD87; on others, two buttons the manual names.

1 2

Some 2019 and newer models: the heat type isn’t set, so it may not start or tumble Not a fault

Press Start until 1 shows, GE’s setting for electric.

Other codes

A numbered code: GE publishes no meaning for owners

Photograph it with the model label and text us.

Text the display and the label

Open the door: GE puts it on the front face around the opening, left or right.

Text a photo to (813) 513-1699

How a GE dryer visit works

  1. Tell us what it’s doing

    Call or text us. The appliance, the symptom and any code are enough to start.

  2. We find the fault

    For the $69 diagnostic visit, credited to the repair if you go ahead.

  3. Get the price in writing

    Before any work starts. No repair until you say yes.

  4. We fix it

    Only the work you approved, at the price you approved.

  5. Get the paperwork

    The appliance, the work done and the date, in writing.

GE dryer questions

Still unsure? Call (813) 513-1699 Text a photo

How do I turn off the Check Vent light on a GE dryer?

GE names no reset button. With the filter and the duct clean, unkinked and clear, dry a load on an automatic cycle and the light should go off, GE says. Still lit? Inspect and clean the exhaust system, GE says.

Why is my GE dryer hot to the touch?

Trapped heat, GE says: a dryer that can’t shed its heat and humidity may run hot, sweat and dry slowly. It draws air in low at the front, so keep that floor clear.

How long can a GE dryer vent be?

GE’s front-load manual recommends at most 90 feet of straight 4-inch rigid metal duct, 45 with two elbows. Models named “Up To 120 ft. Venting” allow 120, the Long Vent GFV55 200. Longer runs, GE warns, “Accumulate lint, creating a potential fire hazard.” We clean the run you have: see dryer vent cleaning.

Is my GE dryer still under warranty?

GE covers a new dryer for one year from purchase, parts and labor, and its GTX52 for five. While it’s covered, GE’s own service network does the repair. GE adds: “Venting problems are not considered a manufacturing defect and are not covered by your warranty.”

More on GE and dryers

Where we work

Beaver Appliance repairs electric GE dryers across South Florida: Broward County and nearby parts of Miami-Dade and Palm Beach counties. Call or text (754) 285-8880.

Beaver Appliance repairs electric GE dryers across Tampa Bay: Pasco and Hillsborough counties and nearby parts of Pinellas and Hernando counties. Call or text (813) 513-1699.